UPack

·          No additional equipment is required if you have prep LC system

·          One hardware set provide columns of different length

·          Dynamic and static bed compression

·          Optional air or water heating/cooling

·          Easy packing and repacking

·          Small setup cost, flexible operations

·          Little bench space required

·          Low weight

·          Patent pending design

Simple and inexpensive way of making your own prep columns in 3 steps.

1         Fill the column with an adsorbent slurry and cap the column with a filter, then switch integrated valve to fill position.

2         Connect the column to a regular prep pump and setup pressure limit on the pump to stop at 1000-5000 psi, depending on your packing material pressure limitation.

3         Start the pump. When pressure reaches the set limit, switch the integrated valve on a top of the column to operation position and start you separation.